Accessories

Substrate preparation: sealing absorbent screeds, consolidating weak surfaces and giving levelling compounds and adhesives a stable key.

M139

M139 Water-based Penetrating Consolidator

Water-based penetrating emulsion for slightly dusty cement and concrete substrates; it can also be used as a primer.

Dilution: 1:3 with water, adjusted to absorptionApplication temperature: 5–35 °C

M190

M190 Epoxy Reinforcement & Moisture-proof Primer

Two-component solvent-free epoxy primer for moisture-proofing damp substrates, consolidating dusty screeds and repairing non-structural cracks and holes.

Type: Two-component solvent-free epoxyMain use: Moisture barrier, consolidation, crack repair

M318

M318 Water-based Primer

Water-based acrylic primer that seals the pores of absorbent concrete and cement screeds and acts as a bonding bridge before self-levelling.

Application temperature: 5–35 °CTouch dry: 1–2 hours at 20 °C

M320

M320 Non-absorbent Primer

Primer for non-absorbent substrates such as ceramic tiles, stone and terrazzo, improving the adhesion of levelling compounds and adhesives on smooth surfaces.

Substrates: Ceramic tile, stone, terrazzo, existing epoxyUse with: M318 on absorbent substrates

Cement-based self-levelling compounds, levelling mortars and rapid repair materials covering 2–50 mm, delivering a flat, sound base for the finished floor.

M210

M210 Ultra-light Patching Mortar

Ultra-light polymer-modified patching mortar for feather-edge repairs and joint treatment over tile, stone, plasterboard and wood substrates.

Build: 0–3 mm feather-edgeSubstrate temperature: 10–35 °C

M220

M220 Rapid Repair Mortar

Rapid-setting, non-sag repair mortar: about 15 minutes working time at 20 °C, hard enough to walk on after two hours, suitable for vertical and edge repairs.

Working time: About 15 min at 20 °CWalkable: About 2 hours

M230

M230 Pavement Repair Mortar

Fast-setting repair mortar that accepts traffic after about four hours, for indoor floors and outdoor pavement repairs.

Traffic: About 4 hoursPackaging: 25 kg paper sack

M415

M415 Rapid Backfill

Lightweight rapid backfill for underfloor heating and general levelling, up to 50 mm in one pass, with low shrinkage and good crack resistance.

Thickness: Up to 50 mmUse: Underfloor heating backfill, levelling

Adhesives formulated for PVC sheet, tile, LVT, rubber and carpet backings — including a conductive grade for ESD flooring.

M720

M720 Universal Flooring Adhesive

Water-based universal adhesive for carpet, PVC tile and quartz tile with high coverage and clean, substrate-friendly removal.

Use: Carpet, PVC tile, quartz tileType: Water-based dispersion

M720D

M720D Conductive PVC Tile Adhesive

One-component conductive adhesive with ultra-fine carbon fibre for conductive and static-dissipative PVC tile floors.

Filler: Ultra-fine carbon fibreUse: Conductive and static-dissipative PVC tile

M730

M730 Carpet Adhesive

Low-odour carpet adhesive with good initial grab for PVC, PU and bitumen-backed carpets.

Use: PVC, PU and bitumen-backed carpetConditions: 10–30 °C, RH ≤ 75%

M735

M735 PVC Tile Adhesive

High-performance water-based adhesive for PVC and CV tile up to 3 mm on absorbent substrates.

Tile thickness: PVC / CV tile up to 3 mmTrowel: A2 notched trowel

Welding tapes, earthing foils, edge details and stair treads that complete the floor system down to the last detail.

AT-0855

Acrylic Foam Tape

Clear acrylic foam tape with high load capacity, waterproof and temperature resistant, for structural bonding of trims and profiles.

Thickness: 0.8 mmFormat: 55 mm × 33 m roll

BZ1050

Copper Foil BZ1050 (without adhesive)

Plain copper foil without adhesive backing for earthing conductive floors, static shielding and signal protection.

Format: 10 × 0.025 mm, 100 m rollUse: ESD earthing, static shielding

CT-7830

Cloth Double-sided Tape

Cloth-based double-sided tape with strong penetration, no lifting or curling, resistant to oil and ageing.

Format: 78 mm × 30 m rollCharacter: High tack, tensile, waterproof

FZF140

（FZF140-A）COLLISION HANDRAIL

（FZF140-A）COLLISION HANDRAIL

规格: 4米/支

Hot-air welding, unrolling, handling and surface preparation tools that decide installation speed and seam quality.

CB-01

Carpet Brush

Carpet brush for daily maintenance and deep cleaning of textile floors.

Use: Carpet cleaning

CS-01

Corrugated Steel Sheet

Corrugated steel strip embedded in repair mortar to bridge floor cracks and stop them reflecting through the surface.

Use: Crack repair

FB-01

Floor Brush

Stiff floor brush for cleaning tile, terrazzo and other hard substrates before installation.

Use: Cleaning hard floors

FD-01

Coil Flooring Dispenser

Dispenser that unrolls flooring coils evenly — faster, safer and far less physical effort.

Use: Unrolling flooring coils

Daily cleaning, wax removal and surface protection for the finished floor — extending service life and keeping the appearance.

3M-AW

3M Antistatic Floor Wax

Antistatic floor wax that lowers surface resistance and suppresses static build-up on PVC floors in electronics plants and server rooms.

Format: 1 US gallon pailUse: Electronics plants, server rooms

3M-HW

3M Super Hard Wax

High-hardness floor finish that builds a durable, glossy protective film for high-traffic commercial floors.

Format: 1 US gallon pail

3M-MC

3M Multi-purpose Cleaner

Multi-purpose cleaner for daily floor cleaning and light oil removal, used diluted.

Format: 1 US gallon pail

3M-SHW

3M Super Solid Hard Wax

Very high solids floor finish — full gloss from fewer coats and longer intervals between maintenance.

Format: 1 US gallon pail