
M720D Conductive PVC Tile Adhesive
Decentralized one-component static conductive function adhesive,suitable for laying all types of static conductive or static dissipative PVC sheet flooring .
Features:
Large area coating
Convenient to construction
Good tack early
Environmental
Containing conductive carbon fibers
Applicable Substrate:
①Suitable for porous absorbent , strong, dry, smooth , no cracks , no grease, no wax floors .
②Suitable for the hard cement-based self-leveling leveling layer.
③Suitable for aerial wood flooring , plywood or particleboard cushion .
Substrate Treatment:
Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment ; recommend M318 Water-Based Primer for closed minor sand ground ( porous absorbent subfloor) ; recommend MSYH Self-Leveling Polymer Cement for leveling uneven ground( leveling thickness at least 2mm); recommend MSYH Two-Component Epoxy Moisture Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend MSYH Two-Component Epoxy Resin Material to repair .
Technical Parameters:
Color : Gray
PH value : 7-8
Density: 1.1kg / L
Dosage: 120-180g / m²
Wait time: About 10 minutes ( due to humidity and temperature vary ) Construction time: Wait Time after time construction is completed in total , about 30-60 minutes (due to humidity and temperature vary )
Can load time: ≥ 24h
Construction Method:
Don’t dilution , please sufficient stir before use , and then use the appropriate A3 scraping tooth coated the adhesive evenly on the substrate surface. According to the temperature and humidity on the construction site, wait for about 5-10 minutes ( more than 50% of the adhesive on the ground becomes transparent ), the floor can be laid in , then push cork to make flooring flattened and use 50kg rolling device to roll on the paved floor to get better effect. *Floor covering installation please refer to the information of each flooring company.
Precautions:
If the temperature is below 15 ℃ construction or relative humidity greater than 75% , please consult our technical staff opinion. Don’t put glue dumped into the sewer or gutterway. Unused glue should be kept sealed. Tools can be cleaned with water .
Packaging and Storage:
20kg or 5kg plastic drum. This product should be stored at indoor 5 ℃ ~ 35 ℃, prevent freezing, solarization. Shelf life of 12 months.