Fabricante y exportador de pavimentos vinílicos comerciales · Cantón, China+86-18664880066export@hedsom.com
FLORMAX NATURA
cat_lvt

FLORMAX NATURA

La reproducción del color es orientativa. Solicite una muestra física antes de la selección final.

Luxury vinyl tile · dry back and looselay · 20 wood colours

FLORMAX NATURA is a wood-look luxury vinyl tile, 184.15 x 1219.2 mm, in 2.0 / 2.5 / 3.0 mm with a PUR surface. The range is supplied as dry back for full-bond installation and as looselay with a fibre-glass reinforced anti-slip backing for fast renovation over existing floors.

  • 20 colores
  • 2.0-3.0 mm · 184.15 x 1219.2 mm
  • EN 13329 class T · Bfl-s1
  • R10 · Luxury vinyl tile · dry back and looselay · 20 wood colours

Descripción del producto

  • Construcción, características principales y aplicaciones recomendadas.

Descripción general

Twenty oak, walnut and ash references printed under a transparent wear layer and finished with a PUR coating. The super-matte surface keeps the wood look without glare, and the 0.3 mm wear layer carries class T wear performance for commercial use.

  • Tile size 184.15 x 1219.2 mm, thickness 2.0 / 2.5 / 3.0 mm
  • Wear layer 0.1 / 0.3 / 0.3 mm, PUR surface treatment
  • Dry back for full bond, looselay for glue-down installation without full glue

Two constructions

Dry back: PUR coating, wear layer, decorative film, middle layer and bottom layer, bonded to a levelled substrate for permanent installation.

Looselay: the same stack plus a fibre-glass layer and an anti-slip backing, so tiles can be installed over most existing hard floors with adhesive only at perimeter and seams.

  • Looselay: easy installation without full glue, renovation friendly
  • Dry back: cost effective, glue-down stability for large areas
  • Both: super matte natural look, R10 anti-slip, Bfl-s1 fire rating

Performance

Dimensional stability below 0.12 %, curling below 1.20 mm and peel resistance above 65 N/50 mm keep joints tight under temperature swings. The floor is R10 anti-slip, Bfl-s1 fire rated, and free of heavy metals and vinyl chloride monomer.

  • Bfl-s1 fire rating, R10 anti-slip
  • Coefficient of friction dry 86 / wet 30
  • No heavy metals, no vinyl chloride monomer

Construcción

  • Una visión clara de lo que hay bajo la superficie y de por qué el sistema rinde como lo hace.
12345 HEDSOM · CONSTRUCTION DIAGRAM
  1. 1
    PUR coatingAdvanced surface treatment for stain resistance and a super matte finish.
  2. 2
    Wear layerTransparent film carrying the traffic class of the tile.
  3. 3
    Decorative filmPrinted wood, stone or textile reference.
  4. 4
    Middle layerVinyl core that keeps the tile flat and stable.
  5. 5
    Bottom layerBacking for full-bond installation; looselay adds a glass-fibre layer and anti-slip backing.

Colores · 20

  • Toda la gama de colores de esta colección. Seleccione una muestra para ampliarla.
  • La reproducción del color es orientativa. Solicite una muestra física antes de la selección final.

Datos técnicos

  • 2.0-3.0 mm · 184.15 x 1219.2 mm · EN 13329 class T · Bfl-s1
  • Los valores técnicos son resultados de ensayo del fabricante. Las condiciones del proyecto, el soporte y la instalación deben confirmarse por separado.
Description
STANDARDRESULT
Total thicknessEN 4282.0 / 2.5 / 3.0 mm
Wear layer thicknessEN 4290.1 / 0.3 / 0.3 mm
Tile sizeEN 427184.15 x 1219.2 mm
Surface treatment-PUR
Installation-Dry back / Looselay
Performance
STANDARDRESULT
Dimensional stabilityEN 434<= 0.12 %
Squareness and straightnessGB/T 4085<= 0.20 mm
CurlingISO 23999<= 1.20 mm
Peel resistanceISO 24345>= 65 N/50 mm
Fire ratingEN 13501-1Bfl-s1
Residual indentationEN 433<= 0.10 mm
Wear groupEN 13329T
Furniture leg testEN 424OK
Castor chair testEN 425OK
Anti-slip gradeDIN 51130R10
Coefficient of frictionBS 7976Dry 86 / Wet 30
Thermal resistanceEN ISO 104560.02 m2.K/W
Colour fastness to lightEN ISO 105-B02>= 6
Chemical resistanceEN ISO 26987Grade 5, highest
ENVIRONMENTAL
STANDARDRESULT
Vinyl chloride monomer contentGB 18586ND
Volatile matter contentGB 18586ND
Heavy metalsGB 18586ND

Descargas

  • Los catálogos, datos técnicos y documentos de cumplimiento de este producto están adjuntos en esta página.
  • Todos los archivos son las versiones publicadas vigentes. Consúltenos si falta algún documento.

Instalación

  • Descargue la guía de instalación o siga los tres pasos siguientes. Nuestro equipo técnico responde a las dudas de obra.
01

Preparación del soporte

Ensayo de humedad, nivelación y imprimación antes de desenrollar y aclimatar el material.

02

Adhesivo y colocación

Adhesivo en plena superficie, respetando el tiempo abierto y recortando las juntas tras el rulado.

03

Soldadura y remates

Fresado, soldadura, recorte y limpieza, con rodapié sanitario cuando la higiene lo exige.

Installation guide · 2.4 MB

Productos alternativos

Ver gama

Déjenos un mensaje

FLORMAX NATURA

Indíquenos el tipo de proyecto, la superficie y la fecha de entrega requerida. Respondemos en un día laborable.

Formulario con control antispam. No se envía nada hasta pulsar enviar.

Los campos con * son obligatorios. Sus datos se usan solo para responder a esta consulta.

↗