Antistatic Plastic Flooring Adhesive

Use

Decentralized antistatic function-component adhesives suitable for laying all types of static conductive or static dissipative PVC flooring.

Primary Treatment

Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment; recommend M318 Water-Based Primer or M139 for closed minor sand ground (porous absorbent subfloor); recommend Self-Leveling Polymer Cement for leveling uneven ground(leveling thickness at least 2mm); recommend M190 Epoxy Reinforcement and Moisture-proof Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend M190 Epoxy Reinforcement and Moisture-proof Primer or M220 Rapid Repair Mortar to repair.

Notes

If the temperature is below 15 ℃ construction or relative humidity is greater than 75%, please contact our technical staff opinion. Do not poured glue into sewers or drains. Unused glue should be sealed. Tools can be cleaned with water.

Packaging and Storage

25kg plastic drum. This product should be stored indoors 5 ℃ ~ 35 ℃, to prevent freezing, exposure. Shelf life of 12 months

<div

Feature

Environmentally friendly

High initial adhension,good final adhension

Containing conductive carbon powder.

Applicable Substrate

1. For a porous absorbent, strong, dry, smooth, no cracks, no oil, no wax floor.

2. Suitable for hard cement-based self-leveling screed.

3. For overhead wooden flooring, plywood or particleboard cushion..

Construction Method

Without dilution, Stir before using, and then use the appropriate S1 teeth scraping the glue evenly over the surface coated at the substrate level. According to the construction site of the temperature and humidity, wait about 10 minutes (more than 50% of the film becomes transparent) surface can be laid in mortar floor, then push the cork board to flatten the floor, then roll is 50 kg rolling on the paved floor, you can achieve the best results. * Please refer to the laying of the floor around the board company information.