M770 · PVC flooring adhesives
Linoleum Floor Adhesive
Efficient water-based adhesive.Suitable for pasting all types of Linoleum coil and sheet flooring on the absorbent substrate.

Données techniques
| Données publiées par le fabricant — vérifiez les valeurs actuelles avant prescription. |
Données publiées par le fabricant — vérifiez les valeurs actuelles avant prescription.
Mise en œuvre
Use
Efficient water-based adhesive.Suitable for pasting all types of Linoleum coil and sheet flooring on the absorbent substrate.
Packaging and Storage
25kg plastic drum. This product should be stored at indoor 5℃-35℃, prevent freezing, solarization. Shelf life of 12 months.
<div
Feature
Environmental protection
High initial adhension,good final adhension
After curing extrusion impact resistant furniture steering wheel.
Applicable Substrate
①Suitable for porous absorbent , strong, smooth, dry , clean, no cracks , no grease, no wax floors
②Suitable for self-leveling leveling layer.
③Suitable for aerial wood flooring , plywood or particleboard cushion
Substrate Treatment
Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment; recommend M318 Water-Based Primer or M139 for closed minor sand ground (porous absorbent subfloor); recommend Self-Leveling Polymer Cement for leveling uneven ground(leveling thickness at least 2mm); recommend M190 Epoxy Reinforcement and Moisture-proof Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend M190 Epoxy Reinforcement and Moisture-proof Primer or M220 Rapid Repair Mortar to repair.
Construction Method
Don’t dilution, use the appropriate scraper (B1 scraping tooth) coated the adhesive evenly on the substrate surface. If finding surface with a small amount of clear fluid after opening bucket, need to stir the glue evenly and then construction. There is no need for drying glue in the process. After the glue is scraped and coated, the floor can be covered on the colloidal surface. The water in the colloid is needed to fully moisturize the linen lining of the flax floor to achieve a good combination effect, then push cork to make flooring flattened and use more than 50kg rolling device to roll on the paved floor to get better effect.
Precautions
If the temperature is below 15℃ construction or relative humidity above 75%, please consult our technical staff opinion. If mucilage with conjunctiva after opening, need to weed out first, stir evenly before use. Don’t put glue dumped into the sewer or gutterway. Unused glue should be kept sealed. Tools can be cleaned with water .
Laissez un message
Linoleum Floor Adhesive
Indiquez le type de projet, la surface et la date de livraison souhaitée. Nous répondons sous un jour ouvré.
Un projet ou une gamme locale à développer ?
Indiquez l’usage, le trafic et le marché cible. Nous vous aiderons à sélectionner les produits et les prochaines étapes.



