Fabricante e exportador de pavimentos vinílicos comerciais · Cantão, China+86-18664880066export@hedsom.com

M770 · PVC flooring adhesives

Linoleum Floor Adhesive

Efficient water-based adhesive.Suitable for pasting all types of Linoleum coil and sheet flooring on the absorbent substrate.

Linoleum Floor Adhesive

Características

  • 绿色环保
  • 初粘力高,终粘力强
  • 固化后耐家具转向轮挤压冲击。

Dados técnicos

Dados publicados pelo fabricante — confirme os valores atuais antes da especificação.

Dados publicados pelo fabricante — confirme os valores atuais antes da especificação.

Aplicação e instalação

Use

Efficient water-based adhesive.Suitable for pasting all types of Linoleum coil and sheet flooring on the absorbent substrate.

Packaging and Storage

25kg plastic drum. This product should be stored at indoor 5℃-35℃, prevent freezing, solarization. Shelf life of 12 months.

<div

Feature

Environmental protection

High initial adhension,good final adhension

After curing extrusion impact resistant furniture steering wheel.

Applicable Substrate

①Suitable for porous absorbent , strong, smooth, dry , clean, no cracks , no grease, no wax floors

②Suitable for self-leveling leveling layer.

③Suitable for aerial wood flooring , plywood or particleboard cushion

Substrate Treatment

Substrate if has oil contamination, wax water and mold release, required wax water decontamination to treatment; recommend M318 Water-Based Primer or M139 for closed minor sand ground (porous absorbent subfloor); recommend Self-Leveling Polymer Cement for leveling uneven ground(leveling thickness at least 2mm); recommend M190 Epoxy Reinforcement and Moisture-proof Primer for treatment wet subfloor moisture. The subfloor presence of cracks recommend M190 Epoxy Reinforcement and Moisture-proof Primer or M220 Rapid Repair Mortar to repair.

Construction Method

Don’t dilution, use the appropriate scraper (B1 scraping tooth) coated the adhesive evenly on the substrate surface. If finding surface with a small amount of clear fluid after opening bucket, need to stir the glue evenly and then construction. There is no need for drying glue in the process. After the glue is scraped and coated, the floor can be covered on the colloidal surface. The water in the colloid is needed to fully moisturize the linen lining of the flax floor to achieve a good combination effect, then push cork to make flooring flattened and use more than 50kg rolling device to roll on the paved floor to get better effect.

Precautions

If the temperature is below 15℃ construction or relative humidity above 75%, please consult our technical staff opinion. If mucilage with conjunctiva after opening, need to weed out first, stir evenly before use. Don’t put glue dumped into the sewer or gutterway. Unused glue should be kept sealed. Tools can be cleaned with water .

Deixe uma mensagem

Linoleum Floor Adhesive

Indique o tipo de projeto, a área e a data de entrega pretendida. Respondemos num dia útil.

Formulário com verificação anti-spam. Nada é enviado antes de submeter.

Os campos com * são obrigatórios. Os seus dados são usados apenas para responder a este pedido.

Planejando um projeto ou sua linha local?

Informe aplicação, tráfego e mercado de destino. Ajudaremos a selecionar produtos e próximos passos.

↗