self-leveling

Product Description

M525 is a self-leveling material with high fluidity and high plasticity. It is suitable for fine leveling of large and medium-sized civil residence, public buildings and light industrial buildings. For laying and pasting all kinds of PVC floor, linoleum floor, rubber floor, wood floor, carpet and other floor materials to provide smooth, intact, solid ideal base.

Packaging and Storage

25kg composite bag. The product shall be kept indoors, pay attention to moisture, prevent freezing, solarization. Stacked on pallets no more than eight layers,Under the condition of good moisture-proof measures the shelf life of six months.

<div

Feature

Good fluidity, fast automatic leveling ground

Fast setting and low shrinkage

The construction thickness is 2-4mm, and the construction thickness can be freely controlled

Excellent compressive and flexural strength

Environmental.

Substrate Treatment

The base must be dry, firm, load-bearing, dust-free, no obstruction to bonding sundries, smooth surface

Base without hollow drum, with good compressive strength; In order to ensure good adhesion, the base is sealed with primer. M318 water-based primer is recommended for absorbent base and M320 non-absorbent primer is recommended for non-absorbent base.

Construction Method

1.Cleaning up substrate, choose the appropriate primer, when the primer in the dry state (about 2-6 hours after the bottom coating), then begin self leveling operation.

2. Pouring 6-6.5L water into container, slowly adding a bag of 25Kg powder, stirring for 3-5 minutes to uniform , evenly spread, with a spatula to exhibit uniform as required thickness, prevent direct sunlight and the wind blowing, it should be completed within 20 minutes. The slurry can be conveyed with a pump capacity (20-40 L/min).

3.Before the initial coagulation, the use of special defoaming roll to exclude the air, to ensure uniform thickness.

s

As the product reacts with water to produce highly alkaline , avoid contact with skin, eyes. In case of contact , immediately wash with water , if the skin or eyes hurt, seek immediate medical attention . This product will not produce the body , environmental impact material after hardening.