M210
M210 Ultra-light Patching Mortar
Ultra-light polymer-modified patching mortar for feather-edge repairs and joint treatment over tile, stone, plasterboard and wood substrates.
Build: 0–3 mm feather-edgeSubstrate temperature: 10–35 °C
產品中心
Self-levelling compounds
Cement-based self-levelling compounds, levelling mortars and rapid repair materials covering 2–50 mm, delivering a flat, sound base for the finished floor.
Self-levelling compounds
Cement-based self-levelling compounds, levelling mortars and rapid repair materials covering 2–50 mm, delivering a flat, sound base for the finished floor.
M220
M220 Rapid Repair Mortar
Rapid-setting, non-sag repair mortar: about 15 minutes working time at 20 °C, hard enough to walk on after two hours, suitable for vertical and edge repairs.
Working time: About 15 min at 20 °CWalkable: About 2 hours
M230
M230 Pavement Repair Mortar
Fast-setting repair mortar that accepts traffic after about four hours, for indoor floors and outdoor pavement repairs.
Traffic: About 4 hoursPackaging: 25 kg paper sack
M415
M415 Rapid Backfill
Lightweight rapid backfill for underfloor heating and general levelling, up to 50 mm in one pass, with low shrinkage and good crack resistance.
Thickness: Up to 50 mmUse: Underfloor heating backfill, levelling
M416
Lightweight Screed
Primary construction thickness of 50mm Low shrinkage, excellent crack resistance
M416
Quick Screed
Quick Screed
M418
Thick Self-leveling
Low alkali formula,Smooth and dense Primary construction thickness of 2mm-30mm
M518
Cement Self-leveling Mortar
M518 is a self-leveling foundation material with high fluidity and high plasticity. It is suitable for fine leveling of residential, office, school, hospital and other light civil residential and public buildings. For laying and pasting all kinds of PVC floor, wood floor, carpet and other ground materials to provide smooth, sound, solid ideal base.
Mixing ratio: Powder(25Kg):water(6L-6.5L)Material Consumption: About 3.5kg/m² ·2mm
M520
self-leveling
M520 is self-leveling material with high liquidity and high plasticity, suitable for home, office, schools, hospitals and other light civilian residential and public building, light industry, building the fine leveling of the ground, For laying all kinds of PVC flooring, flax flooring, wood flooring, carpet and other ground materials to provide smooth, sound, solid ideal base.
M525
self-leveling
M525 is a self-leveling material with high fluidity and high plasticity. It is suitable for fine leveling of large and medium-sized civil residence, public buildings and light industrial buildings. For laying and pasting all kinds of PVC floor, linoleum floor, rubber floor, wood floor, carpet and other floor materials to provide smooth, intact, solid ideal base.
M530
self-leveling
M530 is a self-leveling foundation material with high fluidity and high plasticity, suitable for fine leveling of large and medium-sized civil residential and public buildings, commercial and industrial buildings. For laying and pasting all kinds of PVC floor, flax floor, rubber floor, wood floor, carpet and other floor materials to provide smooth, intact, solid ideal base.
M535
M535 Ultra-strong Self-levelling Compound
High-strength cement-based self-levelling compound for 2–10 mm levelling in commercial and light industrial floors.
Thickness: 2–10 mmSubstrates: Concrete, cement screed, ceramic tile
M610
M610 High-flow Levelling Mortar
High-flow cement-based levelling mortar, 2–20 mm per pass, walkable after about six hours and ready for the next trade after 24 hours.
Thickness: 2–20 mmWalkable: About 6 hours
M616
Two-component self-leveling
M616 two-component self-leveling according to jCT985-2017 and GBT25181-2010 technical requirements. A component and B component fully mixed, with high fluidity and good plasticity, suitable for indoor and outdoor concrete, ceramic tile, steel plate and other base level. For laying all kinds of elastic floor, carpet, wood floor and other decorative materials to provide smooth solid base.
M623
M623 Thick-layer Levelling Mortar
Fine mineral hydraulic mortar for 10–50 mm levelling, renovation of existing floors and backfilling of underfloor heating.
Thickness: 10–50 mmWater: 4.5 ± 0.25 L per 25 kg
M625
Cementitious thick layer self-leveling
M625 Cementitious thick layer self-leveling, use the special cement, fine aggregate, polymer spray powder resin and other raw materials such as cement additive refined but become, have good liquidity, can fast automatic leveling the ground and is suitable for large and medium-sized civilian residential and public buildings, commercial and industrial buildings, warehouses, indoor parking lot, such as the fine leveling of the ground at the grass-roots level, The thickness of a single construction can be up to 5m-25mm, at room temperature (above 25℃) and under the condition of good ventilation, it can be used in about 6 hours. The next process can be carried out after self-leveling and completely drying. It can shorten the construction period, provide smooth and sound, solid ideal base. All kinds of elastic floor, ceramic tile, wood floor, carpet, epoxy, polyurethane and other floor materials can be directly pasted on the finished floor.
M630F
Self-leveling
M630F is a self-leveling material with high fluidity, high plasticity and fast hardening. It is suitable for fine leveling of concrete, mortar base floor or floor tile, grindstone and other smooth base surface treatment. For laying and pasting all kinds of PVC floor, wood floor, carpet and other ground materials to provide smooth, sound, solid ideal base.
M632
M632 Premium Self-levelling Compound
High-performance cement-based compound for 3–40 mm levelling — one product for both thin and thick builds, with early strength.
Thickness: 3–40 mmSubstrate moisture: ≤ 5% CM